Model Exchange

Click on the Title, Author or Picture to open an Entry

Displaying entries 21-30 out of 46.

2D transient pressure field from a boundary

Robert Malkin, University of Bristol
Last updated: January 17, 2012

1 review

This very simple 2D transient model uses the Acoustic Module to show how a pressure wave propagates in time. The scenario is a simple 2D rectangle with one boundary acting as the source of the...

Loudspeaker Driver Electromagnetic v4.1

Loic Queval, University of Tokyo
Last updated: May 27, 2011

1 review

This model is the electromagnetic part of the Loudspeaker Driver model (http://www.comsol.com/showroom/gallery/1369/). The acoustic module is NOT required to open this model.

Low Reynold's k-epsilon model for Comsol v3.5

Laith Hurmez, University of Auckland
Last updated: March 30, 2011

2 reviews

This implemented Low-Re k-epsilon Comsol model is based on the Launder-Sharma damping functions as described in Wilcox's Turbulence modeling for CFD book. Model implementation was in 2D under...

CoBoGUI - An open source graphical user interface for two dimensional solar cell simulations with Comsol Multiphysics v3.5 and Matlab

Stefan Eidelloth, ISFH
Last updated: March 13, 2011

5 reviews

CoBoGUI is a freely available collection of MATLAB scripts for two dimensional solar cell simulations with COMSOL Multiphysics and MATLAB. It proviedes a flexible graphical user interface and...

SPICE RCL-circuit with initial conditions

Per Sundqvist, ABB Corporate Research AB
Last updated: October 5, 2010

12 reviews

This model shows how to set up a SPICE model of a RCL-circuit in COMSOL4.0a with other initial conditions than default. The SPICE (Electric Circuit, "cir") in COMSOL does not allow you to...

Parallel plate capacitor COMSOL 4.0

Michal Radziwon, Syddansk Universitet
Last updated: July 29, 2010

17 reviews

This example show the electrostatic potential and electric fields in parallel plate capacitor with air gap. . Model by Michal Jedrzej Radziwon

Non parallel plate capacitor COMSOL 4.0

Michal Radziwon, Syddansk Universitet
Last updated: July 29, 2010

6 reviews

This example show the electrostatic potential and electric fields in capacitor which plates are tilted and separated with air gap. . Model by Michal Jedrzej Radziwon

[SM v3.5a] Rotation constraints in structural module. With complements

Ivar KJELBERG, CSEM sa
Last updated: April 30, 2010

3 reviews

There are different boundary constraints in COMSOL structural, but in 2D/3D structural (smpn, smsld ...) there are no angular variables predefined, hence no easy way, as in the Euler beam modules,...

[SM 3.5a] 3D Euler Beam Properties Calculations

Ivar KJELBERG, CSEM sa
Last updated: April 30, 2010

5 reviews

3D Euler Beam based FEM models calculate quickly and are very usefull for design otimisation and conctual design phases. In COMSOL, as most FEM codes, 3D Euler Beams require the input of quite...

A MatLAB-based tool for handling Tessellated Free Shape Objects with a Morphing Mesh Procedure

Salvatore Gerbino, University of Molise, IT, Pasquale Franciosa, University of Naples Federico II, IT (pasquale.franciosa@unina.it)
Last updated: February 8, 2010

2 reviews

Description: This is a fully MatLAB-based tool, called ProMESH, allowing to handle tessellated models (in .STL ASCII file format). Open imported tessellated model may be thickened. Geometry shape...