-
Browse by Category
- All solutions
- Boundary Conditions (1)
- Chemical Engineering (5)
- Documentation (1)
- Electromagnetics (3)
- Error Messages (58)
- Fluid Dynamics (3)
- General (7)
- Geometry (18)
- Import (17)
- Installation (53)
- Mesh (12)
- Multiphysics (1)
- PDEs, ODEs, and other equations (3)
- Physics (22)
- Postprocessing (10)
- Solver (19)
- Structural Mechanics (4)
All Solutions
When I try to synchronize the geometry between COMSOL Multiphysics and SpaceClaim, the error message
Unknown unit.
-Unit:
-Unicode:
is displayed.
In the SpaceClaim user interface, click the **Application Menu**...
Version: 4.2,4.2a,4.3,4.3a,4.3b - Platform: Windows
The Crosswind diffusion formulation has been updated in version 4.3b (released May 2013) for all flow interfaces supporting Crosswind diffusion. Models solved with the new formulation can give slightly different...
Version: 4.3b - Platform: All Platforms
When I try to synchronize the geometry between COMSOL and SpaceClaim, the error message
Failed to connect to SpaceClaim. Please make sure SpaceClaim is running.
is displayed. If you have licensed LiveLink for...
Version: 4.3,4.3a,4.3b - Platform: Windows
When I try to synchronize the geometry between COMSOL and Inventor, the error message
Failed to connect to Inventor. Please make sure Inventor is running.
is displayed. In addition, in the Inventor user interface,...
Version: 4.3b - Platform: Windows
When I try to synchronize the geometry between COMSOL and Pro/ENGINEER Wildfire 4.0, the error message
Failed to connect to Pro/ENGINEER. Please make sure Pro/ENGINEER is running.
is displayed. The default setting...
Version: All versions - Platform:
When I try to synchronize the geometry between COMSOL and Solid Edge, the error message
Failed to connect to Solid Edge. Please make sure Solid Edge is running.
is displayed. If you have licensed LiveLink for Solid...
Version: 4.3a,4.3b - Platform: Windows
The **COMSOL** menu and **Parameter Selection** are not available in the Pro/ENGINEER (Creo Elements/Pro) user interface and parameter names are not synchronized to COMSOL. For parameter selection to work in...
Version: 4.3a,4.3b - Platform:
**Parameter Selection** is not available in the Creo Parametric user interface and parameter names are not synchronized to COMSOL. For parameter selection to work in Creo Parametric an add-in needs to be loaded by Creo...
Version: 4.3a,4.3b - Platform:
I have an old contact model that was built in COMSOL Multiphysics 4.0a or earlier. Now that I am using a later version of COMSOL Multiphysics, how can I take advantage of the better stability of this version in my...
Version: All versions - Platform: All Platforms
The property **Displacements control spatial frame** does not exist in Solid Mechanics in COMSOL 4.3b, because the displacements now always control the spatial frame. When loading a model built with a previous version...
Version: 4.3b - Platform:
