Continuity in pressure between two adjacent intervals

Please login with a confirmed email address before reporting spam

Good morning,

I have a piece of soil above a water table at depth equal to z = -3.3m.

In order to don't have any problem regarding the water pressure limit at water level, I decide to split the domain in two interval:

interval 1: from z=0 (reference for the water table in COMSOL) to z=0.5m interval 2: from z=0.5m to z=3.3m

I have two different Richards' equations with two different pressures (pl1 and pl2). I set the upper limit for pl2 max = 0kPa at groundlevel.

But in order to have continuity in the water pressure distribution between the two intervals how can I do?

Because I put a precipitation at Ground level that in someway influences the interval related to the waterlevel; but I have the default setting about "NO FLOW" in the intersection that linked the two intervals and I don't know how to overcome or, at least, replace this condition.

Thanks to all


0 Replies Last Post Dec 20, 2023, 5:18 a.m. EST
COMSOL Moderator

Hello Edoardo Damonte

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.