Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

What are emw.wee1.input.Ex and model.input.E1 in Electromagnetic Waves of 4.2a

Posted May 21, 2012, 12:45 p.m. EDT RF & Microwave Engineering Version 4.2a 2 Replies

Pu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,

I'm trying to figure out the equation system there. Among all the variables, I don't know what these two mean. Since we already have emw.Ebx as the background field, what are these two?

Thanks a lot!
2 Replies Last Post May 21, 2012, 4:02 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 21, 2012, 3:54 p.m. EDT
Hi

no idea, it depends where it comes from, I would assume it has to do with some entries you are setting in a BC value or some domain values. E is normally the electric field and Ex is normally the x component (and not the d(E,x))

--
Good luck
Ivar
Hi no idea, it depends where it comes from, I would assume it has to do with some entries you are setting in a BC value or some domain values. E is normally the electric field and Ex is normally the x component (and not the d(E,x)) -- Good luck Ivar
Pu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 21, 2012, 4:02 p.m. EDT
Hi, Ivar

Thanks for the reply!

I'm just using an Electromagnetic Wave module with scattered-field formulation in 4.2. It's a very simple exercise model.
Hi, Ivar Thanks for the reply! I'm just using an Electromagnetic Wave module with scattered-field formulation in 4.2. It's a very simple exercise model.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content