Here you will find presentations given at COMSOL Conferences around the globe. The presentations explore the innovative research and products designed by your peers using COMSOL Multiphysics. Research topics span a wide array of industries and application areas, including the electrical, mechanical, fluid, and chemical disciplines. Use the Quick Search to find presentations pertaining to your application area.
COMSOL-News-Magazine-2017
COMSOL-News-Magazine-2017-Special-edition-acoustics
COMSOL-News-Magazine-2016

Modeling Spectral Emission Phenomena in Beryllium Plasma Using COMSOL Multiphysics

C. Gavrila[1], C. P. Lungu[2], and I. Gruia[3]
[1]Technical University of Civil Engineering Bucharest, Romania
[2]National Institute for Laser, Plasma and Radiation Physics, Bucharest, Romania
[3]University of Bucharest, Faculty of Physics, Bucharest, Romania

The purpose of this paper is to present a numerical modeling of plasma phenomena in beryllium emissions using COMSOL Multiphysics software. The Beryllium films were deposited on mirror polished fine grain graphite substrates using the Thermionic Vacuum Arc (TVA) technology available at NILPRP – Magurele, Romania. The developed system for thin film deposition using thermionic vacuum arc (TVA) ...

Comparison of Computational Methods for the Estimation of the Dielectrophoretic Force Acting on Biological Cells and Aggregates in Silicon Lab-on-chip

S. Burgarella[1], F. Maggioni[2], and G. Naldi[2]
[1]STMicroelectronics, Agrate Brianza, Milan, Italy
[2]Department of Mathematics, University of Milan, Milan, Italy

Dielectrophoresis is a method for cell manipulation in miniaturized devices exploiting the dielectric properties of cells and/or cellular aggregates suspended in a fluid and subjected to a high-gradient electric field. The mathematical expression of the force is obtained by a multipole expansion whose terms involve increasing power of the particle\'s radius. Three methods for the expression ...

Transient Analysis of the Triggering Behaviour of Safety Fuses

F. Loos, and H.-D. Ließ
Universität der Bundeswehr München
München, Germany

The purpose of this work is to investigate the triggering behaviour of safety fuses for mobile on board supply systems. The influence of different materials and shapes of the fuses on the triggering behaviour are analyzed. Furthermore, the simulation results obtained by the use of COMSOL Multiphysics® are compared to experimentally achieved data. For the transient simulation of the heat ...

Investigations on Hydrodynamic in Stirred Vessels for Educational Purposes

A. Egedy, T. Varga, and T. Chován
University of Pannonia
Department of Process Engineering
Veszprém, Hungary

With detailed hydrodynamic modelling of a system the critical parameters and operation limits can be determined. In the field of fluid dynamic and reactor engineering one of the most important aspects is the practical knowledge of future engineers and technicians. In our research several different reactor constructions and impeller configurations were modelled to achieve a better ...

Electro-Stimulating Implants for Bone Regeneration: Parameter Analysis on Design and Implant Position

Y. Su[1], R. Souffrant[1], D. Klüß[1], R. Bader[1], M. Ellenrieder[1], and H. Ewald[2]
[1]Department of Orthopaedics, University of Rostock, Rostock, Germany
[2]Department of General Electrical Engineering, University of Rostock, Rostock, Germany

A common clinical treatment is the application of alternating electromagnetic fields using a screw implant to the weak bone tissue within the femoral head, which speed up the bone regeneration in case of avascular necrosis of the femoral head . In our present work the bipolar induction screw system as the depicted ASNIS S-Series screw with integrated coil and electrodes were investigated. ...

Simulation and Design of a Microfluidic Respirometer for Semi-Continuous Amperometric Short Time Biochemical Oxygen Demand (BODST) Analysis

F.J. del Campo[1], A. Torrents[1], J. Mas[2], F.X. Muñoz[1]
[1]Instituto de Microelectronica de Barcelona, IMB-CNM (CSIC), Campus Universitat Autònoma de Barcelona, Bellaterra, Barcelona, Spain
[2]Departement de Genètica i Microbiologia, Campus Universitat Autònoma de Barcelona, Bellaterra, Barcelona, Spain

Introduction: This work presents the design of a novel flow cell based miniaturized electrochemical respirometer to monitor organic content in water samples semi-continuously, in contrast to current Biochemical Oxygen Demand, BOD, methods. Simulation techniques has been used to parameterize and optimize aspects such as height and length of the channels, materials and thickness, flow and oxygen ...

Multiphysics Simulations in the Ultrasonic Industry

P.A. Colombo[1]
[1]DepQuest, Dalmine, Italy

This work focuses on the application of multiphysics finite element simulations in the manufacturing and application of high power ultrasonic machines. Industries providing big power ultrasonic solutions as in cleaning, welding, sonochemistry and cutting fields, already apply the finite element simulation approach, in the structural mechanics flavor, in the design and optimization of ultrasonic ...

Theoretical Simulations of Silicon-On-Nothing (SON) Structures

C. Grau Turuelo[1], B. Bergmann[1], C. Breitkopf[1], F. Hoffmann[2], L. Brencher[2]
[1]Technische Universität Dresden, Dresden, Saxony, Germany
[2]Infineon Technologies GmbH, Dresden, Dresden, Saxony, Germany

A novel technique for semiconductor manufacturing is introduced: Silicon-On-Nothing. This process consists of an initial cylindrical trench which has a shape evolution under certain conditions: high temperature (1100 °C), low pressure (10 Torr) and a non-oxidizing atmosphere such as hydrogen. These conditions enable a, mainly, surface diffusion phenomenon whose final result is an empty space ...

AO@SW with Vrala: Simulations and Tests

C. Del Vecchio[1], G. Agapito[1], L. Carbonaro[1], F. Marignetti[2], E. De Santis[2], Y. Coia[2]
[1]National Institute for Astrophysics, Arcetri Astrophysical Observatory, Firenze, Italy
[2]University of Cassino and Southern Latium, Cassino, Italy

VRALA is the ideal candidate as an Adaptive Optics actuator at visible wavelengths. Its electric characteristics variations, suitable current commands, and an effective magnetic circuit geometry provide a 2 kHz correction bandwidth and a 25 mm actuator density. The magnetic core allows unprecedented performances with a negligible thermal impact. Pre-shaping the coil currents greatly simplifies ...

The Application of Low Temperature Plasma in COMSOL Multiphysics

Cheng-Che (Jerry) Hsu[1]
[1]Department of Chemical Engineering, National Taiwan University, Taipei, Taiwan

Multiphysics simulation was used in this work to model inductively coupled plasmas (ICPs). Developing a model of an ICP is challenging due to the complex relationship between the applied electric field and mixture of chemical species that develops. A preliminary model was developed and validated for an Ar/O2 plasma including neutral, ionic, and all major reactions. The validated model was used ...