Rensselaer Polytechnic Institute, Troy, NY, USA
A model was developed to simulate the reaction, concentration field, flow field, and temperature distribution inside a Claus reactor for converting hydrogen sulfide to sulfur. The model considered two ideal reactors, a continuous stirred tank reactor and a plug flow reactor. As expected, two ideal reactors showed much different behaviors in terms of reactant conversion and operating temperature. ...
E. Licon, S. Casas, A. Alcaraz, J.L. Cortina, C. Valderrama
Universitat Politécnica de Catalunya, Barcelona, Spain
Ammonia separation from water by membrane contactor was simulated on transient state and compared with experimental data. Aqueous low concentrated solution of ammonium with high pH has been pumped inside the hydrophobic hollow fibers, acid solution in the outside part. The system is in closed loop configuration. In order to simulate the separation process, equations were developed considering ...
E. Carcadea, M. Varlam, I. Stefanescu
National Research Institute for Isotopic & Cryogenic Technologies, Rm.Vâlcea, Romania
Steam methane reforming is a widely studied process because of its importance for hydrogen production. A two-dimensional membrane-reactor model was developed to investigate the steam-methane reforming reactions. The use of membrane as membrane-reactor separator offer us few advantages because it help in continuously removing the hydrogen from the reaction zone, shifting the chemical equilibrium ...
Mass Transfer from a Single Spherical Bubble with the Presence of Chemical Reaction - the Effect of Interface Contamination at Low Reynolds Number
A. Dani, A. Cockx, and P. Guiraud
Ingénierie des Systèmes Biologiques et des Procédés, CNRS, INRA, INSA, Toulouse, France
The objective of this work is to compute the mass transfer with chemical reaction (first order reaction) from a single spherical bubble at a low Reynolds number by Direct Numerical Simulation. Firstly, the contamination of the bubble's surface by the surfactants is considered, since this can reduce the slip velocity at the interface. The stagnant cap model is used to represent these phenomena and ...
K. M. Al-Shurman, H. Naseem
The Institute for Nanoscience & Engineering, University of Arkansas, Fayetteville, AR, USA
Chemical vapor deposition (CVD) is a promising effective method for synthesis of graphene films. CVD graphene film is obtained from hydrocarbon species such as CH4 through complex catalytic chemical reactions on the surface of the catalyst. Therefore, studying the catalytic reaction kinetics is essential process for understanding the thermal decomposition rate of methane on catalyst surface as ...
N. Ghasem, M. Al-Marzouqi, N. Abdul Rahim
UAE University, Al-Ain, United Arab Emirates
A comprehensive mathematical model that includes mass and heat transfer was developed for the transport of gas mixture of carbon dioxide and methane through hollow fiber membrane (HFM) contactor. COMSOL Multiphysics® was used in solving the set of partial, ordinary and algebraic equations. The model was based on "non-wetted mode" in which the gas mixture filled the membrane pores for ...
S.C. Seetharam, D. Jacques
Performance Assessments Unit, Institute for Environment, Health and Safety, Belgian Nuclear Research Centre (SCK•CEN), Mol, Belgium
This paper documents current status in the development of a coupled thermal-hydraulic-chemical-geomechanical numerical suite within COMSOL-MATLAB environment to address soil and concrete applications. The mathematical formulations are based on well-established continuum scale models unifying mass conservation, energy conservation, charge conservation, thermodynamic equilibrium and kinetics and ...
Sulfur Deactivation Effects on Catalytic Steam Reforming of Methane Produced by Biomass Gasification
P. Sadooghi, R. Rauch
Vienna University of Technology, Vienna, Austria
Sulfur, which is incorporated in the biomass structure, is released into the product gas during gasification as hydrogen sulfide. Hydrogen sulfide is known to deactivate nickel based steam reforming catalysts by chemisorption on the metal surface during steam reforming process. Desulfurization has a negative effect on the process efficiency therefore steam reforming has to be run without ...
Diffusion and Reaction in Fe-Based Catalyst for Fischer-Tropsch Synthesis Using Micro Kinetic Rate Expressions
A. Nanduri, P. L. Mills
Department of Chemical & Natural Gas Engineering, Texas A&M University, Kingsville, TX, USA
Fischer-Tropsch synthesis (FTS) is a highly exothermic polymerization reaction of syngas (CO+H2) in the presence of Fe/Co/Ru-based catalysts to produce a wide range of paraffins, olefins and oxygenates, often known as syncrude. Multi-Tubular Fixed Bed Reactors (MTFBR) and Slurry Bubble Column Reactors (SBCR) are widely employed for FTS processes. The scale-up of MTFBR is complicated by the ...
S. Mahajani, S. Srikantiah, G. Samdani, A. Ganesh, P. Aghalayam
Department of Chemical Engineering, Indian Institute of Technology Bombay, Mumbai, Maharashtra, India
Indian Institute of Technology Madras, Chennai, India
UCG is a process which converts coal to syn gas at the underground coal seam itself. UCG can help meeting the rising energy demand by utilizing coal resources that otherwise would be too deep, or of poor quality, or simply not economical to mine. As UCG takes place, a cavity is formed underground in the coal seam which grows three-dimensionally. The objective of this work is to develop a ...