See How Multiphysics Simulation Is Used in Research and Development

Engineers, researchers, and scientists across industries use multiphysics simulation to research and develop innovative product designs and processes. Find inspiration in technical papers and presentations they have presented at the COMSOL Conference. Browse the selection below or use the Quick Search tool to find a specific presentation or filter by application area.
View the COMSOL Conference 2018 Collection
Acoustics and Vibrationsx

FEM Simulation of Generation of Bulk Acoustic Waves and their Effects in SAW Devices

A.K. Namdeo[1], N. Ramakrishnan[2], and H.B. Nemade[1]
[1]Department of Electronics and Communication Engineering, Indian Institute of Technology Guwahati, Guwahati, India
[2]Centre for Nanotechnology, Indian Institute of Technology Guwahati, Guwahati, India

This paper presents finite element method (FEM) simulation study of the generation of bulk acoustic waves (BAWs) and their effect on the performance of surface acoustic wave (SAW) devices, using COMSOL Multiphysics. A SAW delay line structure using YZ-cut lithium niobate substrate is ... Read More

Dynamic Characterization and Mechanical Simulation of Cantilevers for Electromechanical Vibration Energy Harvesting

N. Alcheick[1], H. Nesser[1], H. Debeda[1], C. Ayela[1], I. Dufour [1]
[1]Univ. Bordeaux, IMS Lab, Pessac, France

Energy harvesting from ambient vibrations has become an interesting topic for powering wireless sensor networks. Resonant microdevices based on MEMS have become of central importance at low frequency. The power produced at resonance is at least one order of magnitude larger than off ... Read More

Application of a Weakly Non-Linear Analysis to the Analysis of Thermoacoustic Combustion Instabilities new

D. Laera[1], S. M. Camporeale[1], G. Campa[2]
[1]Politecnico di Bari, Bari, Italy
[2]Ansaldo Energia, Genoa, Italy

The thermoacoustic combustion instabilities are complex phenomena that may occur in steady flow combustion systems that are aboard of, e.g., rocket engines or gas turbines. The phenomena involve the interaction of chemical reactions with fluid-dynamic and propagation of pressure waves in ... Read More

Developing Solutions to Tonal Noise from Wind Turbines Using COMSOL Multiphysics® Software

J. M. Stauber [1], B. A. Marmo [1],
[1] Xi Engineering Ltd, Edinburgh, United Kingdom

Tonal noise from wind turbines can have effects on neighboring residences and its emission can result in strong regulatory penalties that can include the closure of wind farms. The authors present a model of a new broadband damping approach where containers filled with EniDamp™, an ... Read More

Simulation of Acoustic Wave-Structure Interaction in a Quarter Wavelength Tube Energy Harvester

L. Melander [1], J. H. You [1],
[1] University of St. Thomas, St. Paul, MN, USA

An acoustic energy harvesting system at low frequency (~200 Hz) using lead zirconate titanate (PZT) piezoelectric cantilever plates placed inside of a quarter-wavelength straight-tube resonator has previously been studied using COMSOL and verified experimentally. When an incident ... Read More

A Computational Acoustic Interrogation of Damage to Wind Turbine Blades

R. Canturk [1], M. Inalpolat [1],
[1] University of Massachusetts - Lowell, Lowell, MA, USA

Modern wind turbine blades consist of composite airfoil shaped structures that form a hollow acoustic cavity. Because of continually varying aerodynamic forces, gravitational loads, lightning strikes, and weather conditions, all blades will experience leading and trailing edge splits, ... Read More

Studies of Sound Radiation from Beams with Acoustic Black Holes

C. Zhao [1], M. G. Prasad [1],
[1] Stevens Institute of Technology, Hoboken, NJ, USA

Recently, acoustic black holes (ABH), a new passive structural modification approach to control vibration and noise from mechanical structures have been developed and studied. This preliminary study presents the work on the influence of acoustical black holes on the vibration and sound ... Read More

High-Intensity Piezo-Ceramic Ultrasonic Transducer with Mechanical Amplifier and Radiation Plate

A. van Wijhe[1], W. de Jong[1]
[1]Process & Energy, 3mE, TU Delft, The Netherlands

A COMSOL Multiphysics® model was made to design a mechanical amplifier and radiation plate for the emission of high intensity 40.5 kHz ultrasound to air by means of a Langevin type transducer usually applied in cleaning baths for example. In this work, ultrasonic irradiation is aimed at ... Read More

Acoustic Scattering through a Circular Orifice in Low Mach Number Flow

S. Sack [1], M. Abom [1]
[1] KTH, the Royal Institute of Technology, Stockholm, Sweden

The acoustic scattering through a circular orifice plate in a duct with low Mach number flow (M=0.1) is computed using the Linearized Navier-Stokes physics interface of COMSOL Multiphysics®. The work by Kierkegaard et al. is extended to account for higher order acoustic modes, i.e., ... Read More

COMSOL Multiphysics® Simulation of Ultrasonic Energy in Cleaning Tanks new

L. Zhong[1]
[1]Seagate Technology, Bloomington, MN, USA

Ultrasonic based cleaning process, widely used in various industries, mainly utilizes the cavitation effect to achieve contamination removal. For a given set of ultrasonic tank parameters, such as cleaning fluid, temperature, frequency etc, the cavitation effect is largely impacted by ... Read More