J. Crompton, S. Yushanov, L.T. Gritter, K.C. Koppenhoefer
AltaSim Technologies, Columbus, OH, USA
The resonance conditions for surface plasmons are influenced by the type and amount of material on a surface. Full insight into surface plasmon resonance requires quantum mechanics considerations. However, it can be also described in terms of classical electromagnetic theory by considering electromagnetic wave reflection, transmission, and absorption for the multi-layer medium. The two commonly ...
G. Zhu, E.M. Dede
Toyota Research Institute of North America, Ann Arbor, MI, USA
In previous work, a two-dimensional (2D) model was carried out to simulate the phononic band structure of a phononic crystal with square lattice structure, but this model did not account for the out-of-plane phonon dispersions . In fact, for 2D films used for coating materials, it is more interesting to understand their cross-plane properties. In this work, the phonon dispersion relation of 2D ...
Simulation of Acoustic Energy Harvesting Using Piezoelectric Plates in a Quarter-Wavelength Straight-Tube Resonator
B. Li, J.H. You
Southern Methodist University, Dallas, TX, USA
An acoustic energy harvesting mechanism at low frequency (~200 Hz) using lead zirconate titanate (PZT) piezoelectric cantilever plates placed inside a quarter-wavelength straight-tube resonator has been studied using COMSOL Multiphysics 4.3 and compared with experimental data. When the tube resonator is excited by an incident wave at its acoustic eigenfrequency, an amplified acoustic resonant ...
E. Gutierrez-Miravete, B. Fontenault
Rensselaer Polytechnic Institute, Hartford, CT, USA
General Dynamics-Electric Boat, Groton, CT, USA
A novel combined photovoltaic-thermal panel can simultaneously increase the conversion efficiency of the PV cell and utilize some of the excess thermal energy created by the conversion process (see Figure 1). The Conjugate Heat Transfer physics in COMSOL was used to create a two-dimensional, steady state model of such a combined photovoltaic cell-thermal panel. Figure 2 shows a magnified view of ...
Numerical Study and Simulation in COMSOL Multiphysics of the Dilution Process during Dust Sampling in Dry Machining
B. Wenga-Ntcheping, A. Djebara, R. Kamguem, J. Kouam, V. Songmene
University of Quebec-École de Technologie Supérieure, Montreal, Canada
Dilution’s issue during dry machining have raised the interest’s environmental researchers and engineers. In fact, the sampling of dust emitted during dry machining was a serious problem for air quality evaluation at the workplace. Furthermore, the best sampling of fine and ultrafine particles produced during material cutting, passed through the dilution of high particle concentration ...
Voxtel, Inc, Beaverton, OR, USA
University of Oregon, Eugene, OR, USA
In this paper the heat transfer module in COMSOL is utilized to simulate internal heating of an Avalanche Photodiode due to light-induced current through a resistivity that depends on charge carrier concentrations in the device. Initial tests are done by modeling the heating process on a previously-solved silicon p-n junction as a proof of concept before advancing to a more complicated geometry. ...
Optimization of Artificial Diffusion Stabilization Techniques and Corresponding Mesh Density Distribution in Drift Dominated Transport of Diluted Species
J. Jadidian, M. Zahn, N. Lavesson, O. Widlund, K. Borg
Massachusetts Institute of Technology, Cambridge, MA, USA
ABB Corporate Research, Västerås, Sweden
This paper presents an optimized combination of artificial diffusion techniques to stabilize a drift dominated streamer discharge model which includes COMSOL Multiphysics’ Transport of Diluted Species modules for positive ion, negative ion, and electron charge densities, coupled through the Electrostatic module. A Thermal Conduction and Convection module is responsible for the heat transfer in ...
Y. Lu, E. Garboczi, D. Bentz
National Institute of Standards and Technology, Gaithersburg, MD, USA
The prediction of concrete materials service life is not easy, because the complex heterogeneous microstructure and the random nature of concrete materials. Study the presence of cracks in concrete and their effect on coupled reaction and transport are of great interest in civil engineering. Cracks with different widths and depths will reduce the cover thickness and accelerate the migration of ...
M. Liu, G. Zhao
University of Regina, Regina, SK, Canada
This study presents a oil-gas two-phase linear flow EMH model using COMSOL Multiphysics simulator. Special attention is focused on reservoirs with characteristics for which steam injection is not attractive or feasible such as low permeability, thin-zone, and extra-heavy oil reservoirs. Comparisons showed that cumulative oil production obtained by EM heating is better than what is achieved by a ...
J.R. Puentes, T.A. Osswald, S. Schick, J. Berg
Polymer Engineering Center, University of Wisconsin, Madison, WI, USA
TEEL Plastics, Baraboo, WI, USA
The extrusion of polyolefin pipes suffers degradation due to mechanical design problems of the extrusion die that is commonly used. This study uses numerical and computational approaches to detect problematic areas in the die geometry. Simulations show that in the conventional die there are areas of stagnation and recirculation of the melt flow, resulting in greater residence times, one of the ...