The Application Gallery features COMSOL Multiphysics® tutorial and demo app files pertinent to the electrical, structural, acoustics, fluid, heat, and chemical disciplines. You can use these examples as a starting point for your own simulation work by downloading the tutorial model or demo app file and its accompanying instructions.

Search for tutorials and apps relevant to your area of expertise via the Quick Search feature. To download the MPH-files, log in or create a COMSOL Access account that is associated with a valid COMSOL license. Note that many of the examples featured here can also be accessed via the Application Libraries that are built into the COMSOL Multiphysics® software and available from the File menu.


Acoustic Streaming in a Microchannel Cross Section

Recent advances in the fabrication of microfluidic systems require handling of live cells and other micro particles as well as mixing. All this can, for example, be achieved using acoustic radiation forces and the viscous drag from the streaming flow. Streaming: Due to the nonlinear terms in the Navier-Stokes equations, harmonic perturbation of the flow will lead to a net time-averaged flow ...

Loudspeaker Driver in a Vented Enclosure

This model of a boxed loudspeaker lets you apply a nominal driving voltage and extract the resulting sound pressure level in the outside room as a function of the frequency. The sensitivity, both on-axis and spatial, is determined as function of frequency. These are some of the most important design parameters for a loudspeaker. The electromagnetic properties of the driver are supplied from the ...

Acoustic-Structure Interaction with a Perfectly Matched Layer (PML)

This small tutorial model shows how to set up a model with a solid mechanics and a pressure acoustics domain including a common perfectly matched layer (PML). The PML is used to model an open or infinite domain for both the elastic waves and the pressure waves. Two configurations of PMLs exist (this model describes the first case which is also the most difficult to handle): 1. One PML should ...

Piezoelectric Tonpilz Transducer

The tonpilz (sound mushroom) piezoelectric transducer is a transducer for relatively low frequency, high power sound emission. The transducer consists of piezoceramic rings stacked between massive ends and pre-stressed by a central bolt. The tail and head mass lower the resonance frequency of the device. In this model the frequency response of the transducer when the bolt is not pre-stressed ...

Anechoic Coating

Anechoic coatings are used for lowering visibility to sonars, for example on submarines. This model calculates the reflection, absorption, and transmission properties of an anechoic coating on a steel plate based on a setup from literature.

Helmholtz Resonator with Flow: Interaction of Flow and Acoustics

Helmholtz resonators are used in exhaust systems, as they can attenuate a specific narrow frequency band. The presence of a flow in the system alters the acoustic properties of the resonator and the transmission loss of the subsystem. In this tutorial model, a Helmholtz resonator is located as a side branch to a main duct. The transmission loss through the main duct is investigated when a flow ...

Transient Gaussian Explosion

An ellipse with sound-hard walls has the interesting property that an acoustic signal emanating from one of the foci refocuses at the other focal point b/c seconds later, where b (in meters) is the major axis length and c (m/s) is the speed of sound. This model involves a Gaussian explosion at one focus of an ellipse to illustrate some properties of time-dependent acoustic problems. The ...

Cylindrical Subwoofer

In this model, the acoustic field inside and outside a down-firing subwoofer is computed. This model is set up in 2D axisymmetry using the Pressure Acoustics application mode. The modeled physical domain is a hemisphere with a radius of 1 m. To minimize the effect of non-physical reflections at the exterior boundary of this domain, an absorbing Perfectly Matched Layer (PML) is added. The ...

Open Pipe

In this model, sound created by a vibrating piston radiates through a baffled pipe. The impedance is measured and then used in an impedance boundary condition that replaces the surrounding air domain. This technique can be employed to reduce solution time and memory usage for large models with pipe openings.

Focused Ultrasound Induced Heating in Tissue Phantom

This model example shows how to model tissue heating induced by focused ultrasound. First, the stationary acoustic field in the water and the tissue are modeled to obtain the acoustic intensity distribution in the tissue. The absorbed acoustic energy is then calculated and used as the heat source for a Bioheat Transfer physics in the tissue domain in a time-dependent study simulating the ...