Voltammetry at a Microdisk Electrode
Application ID: 12877
Voltammetry is modeled at a microelectrode of 10um radius. In this common analytical electrochemistry technique, the potential at a working electrode is swept up and down and the current is recorded. The current-voltage waveform ("voltammogram") gives information about the reactivity and mass transport properties of the analyte.
Microelectrodes are popular in electroanalysis because they provide high current densities with a small quantity of active electrode material. The short diffusion timescales to a microelectrode mean that the steady-state result is accurate and so a Stationary study can be used. The Secondary Current Distribution and Transport of Diluted Species interfaces are used to couple charge and mass transfer with an electrode reaction.
This model is included as an example in the following products:Batteries & Fuel Cells Module Corrosion Module Electrochemistry Module Electrodeposition Module
however additional products may be needed to reproduce it. This example may be created and run using components from the following product combinations:
- COMSOL Multiphysics® and
- either the Batteries & Fuel Cells Module, Corrosion Module, Electrochemistry Module, or Electrodeposition Module
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Specification Chart and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.