Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

frequency sweep

Posted Sep 4, 2010, 6:11 p.m. EDT 0 Replies

John Lu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am trying to do a frequency sweep for version4, and observing EM fields for a resonating coil. More specifically, I am using a frequency domain solver and scan across two different frequencies (this can be generalized to more freq). Then later, under derived expressions, I wish to view what the port impedance and EM fields in the plots of the simulation is for the 1st frequency, and then what the port impedance and EM fields are under the 2nd frequency. I am able to calculate a port impedance, but am just not sure whether this is for the first or the second frequency. Is there any way to choose between setting our answers for one of the two frequencies that we already scanned. I am easily able to do this is 3.5a, but after trying this same attempt in 4.0a, I am unable to select between the two frequencies.

Thanks in advance
0 Replies Last Post Sep 4, 2010, 6:11 p.m. EDT
COMSOL Moderator

Hello John Lu

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content