Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
clearing all solutions causes initialization problem
Posted May 29, 2012, 2:35 p.m. EDT 0 Replies
Please login with a confirmed email address before reporting spam
In developing a more complex chemical reaction model, I ran into a "Solution not initialized" error. Attached are two files the reproduce this error.
test_3a.mph is a simple equilibrium chemical reaction solved in 0D using the global equations physics and a stationary solver study. This produces the correct results and does so even if all solutions are cleared using "Edit>>Clear All Solutions" menu option.
test_3b.mph adds a second reaction kinetics model (mod2) and a second time dependent solver. This also gives the correct results until the "Edit>>Clear All Solutions" menu option is used and then the "Solution not initialized" error occurs. Not matter what I have tried in setting the solver "Dependent Variable" settings, I cannot get past this error.
I would appreciate some help in understanding what is happening and if there is some concept I am missing. Thanks in advance.
Peter
Attachments:
Hello Peter Rieke
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.