Showing result: 1 - 10 of 87
Electromagnetic Wave & Static Applications
-
Absorbed Radiation (SAR value) in a Human Head
The increasing use of wireless equipment has also increased the amount of radiation energy to which human bodies are exposed. A common property that measures absorbed energy is the SAR value, (specific absorption rate) to determine the amount of radiation that human tissue absorbs.
The human head...
Read more about this model -
Balanced Patch Antenna for 6 GHz
Patch antennas are compact and easy to fabricate. The layout of the patch and the properties of the printed circuit board determine the radiation pattern.
This model is a full 3D simulation of a patch antenna. It finds the optimum radiation frequency, antenna impedance, and radiation pattern. It...
Read more about this model -
Simulating a Generator in 3D
The generator analyzed in this model consists of a rotor with permanent magnets and a nonlinear magnetic material inside a stator of the same magnetic material.
The model calculates the static magnetic fields inside and around the generator.
The nonlinearity of the magnetic material is modele...
Read more about this model -
RF-Heated Hot Wall Furnace for Semiconductor Processing
Furnace reactors are used in the fabrication of semiconductor industry to grow layers on the wafers. These can also be used for epitaxial growth, which is a key technology for fabrication of electrical devices. For the wide band gap silicon carbide substance growth takes place in graphite susceptor...
Read more about this model -
Model of an RFID System
An RFID system consists of two main parts:
A tag or transponder with a printed circuit-board (PCB) antenna
A reader unit with a larger RF antennaThe reader antenna generates an electromagnetic field that energizes a chip (IC-circuit) inside the tag. The electromagnetic field is modulated by the ta...
Read more about this model -
Loudspeaker
A woofer is made from, a cone-shaped diaphragm with a voice coil wound around its apex. When an electric signal is applied to the coil, the coil and the cone start vibrating, creating sound with the same frequency as the signal.
This model computes the coil’s electrical impedance and then feed...
Read more about this model -
Microresistor Beam
The example illustrates the ability to couple thermal, electrical, and structural analysis in the one model. This particular application displaces part of a beam by passing a current through it; the current generates heat, and the temperature increase leads to displacement through thermal expansion....
Read more about this model -
Photonic Crystal
Photonic crystal devices are periodic structures of alternating layers of materials with different refractive indices. Waveguides that are confined inside of a photonic crystal can have very sharp low-loss bends, which may enable an increase in integration density of several orders of magnitude....
Read more about this model -
Bond Wires to a Chip
Bonding wires connect an integrated circuit to the pins of the package that holds it. These wires introduce relatively large inductances that can introduce crosstalk and distort the signals.
This model calculates the lumped parameters in the form of self inductance and the mutual inductance betwe...
Read more about this model -
Cantilever Beam
The elastic cantilever beam is one of the elementary structures used in MEMS designs.
This model shows the bending of a cantilever beam under an applied electrostatic load. This is computed from the electric field that is solved in the deforming geometry/mesh domain using the Arbitrary Lagrangian...
Read more about this model