Mads Herring Jensen | February 28, 2014

Previously, we introduced the theory behind thermoacoustics. Here, I will go deeper into modeling acoustics with the Thermoacoustic interface in COMSOL Multiphysics and show you some tips and tricks on how to do this.

Read more ⇢

Article Categories

Mads Herring Jensen | February 27, 2014

When sound propagates in structures and geometries with small dimensions, the sound waves become attenuated because of thermal and viscous losses. More specifically, the losses occur in the acoustic thermal and viscous boundary layers near the walls. This is a known phenomenon that needs to be included when studying and simulating systems affected by these losses in order to model these systems correctly and to match measurements.

Read more ⇢

Article Categories

Mads Herring Jensen | January 2, 2014

I recently had the pleasure of preparing a small contribution to the 166th Meeting of the Acoustical Society of America (Fall 2013) together with Wade Conklin and Jordan Schultz from Knowles Electronics. Wade presented our paper entitled “Characterization of a microelectromechanical microphone using the finite element method”. The work consisted of implementing a virtual prototype of a Knowles MEMS microphone (the SPU0409LE5H microphone, see picture below) using COMSOL Multiphysics.

Read more ⇢

Article Categories

Mads Herring Jensen | July 8, 2013

Last month, the Acoustical Society of America (ASA) and the Canadian Acoustical Association (CAA) held the 21st joint meeting of the International Congress on Acoustics (ICA) in Montreal, Canada. This joint congress is one of the major acoustics conferences of 2013, featuring a range of parallel sessions that covered most topics in acoustics. These included, among other things, psycho acoustics, underwater acoustics, transducer modeling, acoustics of musical instruments, nonlinear acoustics, and many more. This year’s acoustics conference also featured a […]

Read more ⇢

Article Categories

Mads Herring Jensen | May 23, 2013

Mufflers are often located in exhaust systems or on heat, ventilation, and air conditioning (HVAC) systems, where their key functionality is to dampen the noise that is emitted from the system. A correct description of the acoustic damping (absorption and attenuation) processes in the muffler is important when designing and modeling these systems.

Read more ⇢

Article Categories

Mads Herring Jensen | March 7, 2013

The use of acoustic waves to manipulate suspensions of particles, such as cells, has inspired the work of many researchers, paving the way for the field of ultrasound acoustofluidics. The manipulation is achieved in many ways, including using bulk acoustic waves (BAW) and surface acoustic waves (SAW), as well as acoustic radiation forces and acoustic streaming-induced drag. The latter two combine to produce the acoustophoretic motion of the suspended particles; i.e., movement by means of sound, and the methods provide […]

Read more ⇢

Article Categories

Mads Herring Jensen | August 9, 2012

COMSOL is going to be a silver sponsor for the Inter-Noise 2012 conference that will be held in New York City on August 19-22. Inter-Noise 2012 will be the 41st International Congress and Exposition on Noise Control Engineering. This event is one of the largest acoustics conferences and covers a variety of topics in acoustics, vibrations, and noise control, including a session on numerical techniques.

Read more ⇢

Article Categories